How To Change The Color Of A Jpeg In Paint

Download Article

Download Article

This wikiHow teaches y'all how to employ Pigment'south colour replacement characteristic on a Windows computer. Microsoft Pigment can't replace complex colors the mode that Photoshop can, but y'all tin use the eraser tool to replace a simple color with another color without touching the other colors in the projection.

Steps

1. 1

   Open Get-go . Click the Windows logo in the bottom-left corner of the screen.

2. ii

   Open Paint. Blazon in pigment, then click Paint in the Start menu. The Paint window will open.

   • If you see something called "Paint 3D", don't select it—Pigment 3D is divide from Microsoft Pigment.

   Advertisement

3. 3

   Open an image if necessary. While Paint's color replacement feature can't handle complex colors, you can open a simple Paint project or clip art to edit if need be:

   • Click File in the top-left corner of the Paint window.
   • Click Open in the drop-downwards menu.
   • Go to the location of the image yous want to open up.
   • Click the prototype.
   • Click Open.
   • If y'all aren't opening an existing file, create the Paint projection y'all want to use before proceeding.

4. 4

   Select the eyedropper tool. Click the eyedropper-shaped icon in the "Tools" section at the superlative of the Pigment window.

5. 5

   Click the colour you lot want to replace. This will assign the color to the "Color i" section at the top of the Paint window.

   • You can zoom in to become a better view of the colour by clicking + in the lesser-right corner of the window.

6. 6

   Select the eyedropper tool again. Click its icon in the "Tools" section to do and so.

   • Skip this step if the color you want to replace the first colour with isn't on the canvas.

7. 7

   Correct-click the colour you want to use to replace the first colour. This will add it to the "Color 2" box, signifying that the "Color 1" box'southward color will be replaced with the "Color 2" box'south colour.

   • If yous skipped the last step, you'll instead click the Colour 2 box at the top of the page and then click the color y'all want to use from the palette at the summit of the window.

8. eight

   Select the eraser tool. Click the pink, eraser-shaped icon in the "Tools" section.

9. 9

   Right-click and drag beyond the colour you want to replace. This volition cause the "Color two" box's color to replace the "Color 1" box's color without altering whatsoever of the other colors on the canvas.

   • Practice not use the left mouse button for this footstep. Doing so will cause the eraser tool to erase annihilation you drag it across instead of just erasing the color you lot selected as the ane to supercede.

   Advertisement

Add New Question

• Question

  I don't even get a xanthous circle! What else tin I try?

  

  If you're on Windows vii+ the circle doesn't announced, but the cursor changes to a pocket-sized square.

• Question

  How practice I return the page to normal in one case I am on the black screen?

  

  On the height left corner, y'all will meet two arrows. Select the one that'southward bluish, but furthest to the left or press Ctrl-z.

• Question

  It says to drag the mouse while holding right click. Only I'm using a laptop, I can't practice that! What practice I do?

  

  If you have a two-push touch pad, employ one hand to right click and one hand to elevate.

• Question

  When I click the eraser tool with colour 1 set to the colour I desire removed, the piddling box doesn't turn the color (number 1 color). What can I practice?

  

  Wade Willson

  Community Answer

  The little box is non supposed to turn to color 1. It is supposed to turn to colour 2.

• Question

  Is there any mode to replace all of a certain colour with another i?

  

  Use the saucepan tool; information technology replaces all of a certain color that's not blocked off.

• Question

  Following these instructions, the eraser seems to erase every color indiscriminately. What am I missing?

  

  You lot are probably holding the left mouse button down while erasing, rather than the correct mouse push button.

• Question

  I couldn't supervene upon the colors in MS Paint, though I followed the steps. What practice I practise?

  

  It depends on if yous've airtight and saved it earlier opening it support to do that. Make certain to save and shut, then check back.

• Question

  What practise I do if right clicking doesn't supercede the color?

  

  This is likely happening because you're using a PNG or JPEG file, rather than a BMP. Copy and place your image in a brand new paint window and try the color replacement method in the new window.

• Question

  What do I exercise if clicking the pixel when I try this simply colors in that pixel when I click to select the color to be replaced?

  

  That probably ways you lot didn't select the eyedropper first. ane) Left click on the heart dropper. Left click on the color you want to replace. That color should appear in the Colour ane box. 2) Change the Colour 2 box by get-go left clicking on the box and the either: a) left clicking on the colour in the colour-set that you lot want; b) using the eyedropper to select a color from your epitome. 3) Left click on the eraser. Now right click on the paradigm and elevate the mouse around while holding down the right mouse button. Everything that is Color ane in the image should change to Colour 2.

Ask a Question

200 characters left

Include your e-mail accost to get a message when this question is answered.

Submit

Advertising

• Brand sure you're using the eyedropper to select the first color. Failing to practise so may cause the eraser to employ your "Color 2" color to everything information technology touches.

Advertisement

• Sometimes, a colored outline will be left surrounding an object for which you replaced the color. You will have to get rid of this outline manually.

• These steps volition only work for MS Pigment versions 6.1 and college.^[1]

Advertising

About This Commodity

Article Summary X

1. Click the eyedropper tool.
2. Click the color you want to supercede.
3. Click the eyedropper tool again.
4. Correct-click the replacement color.
five. Click the eraser tool.
6. Right-click and drag the color you want to supercede.

Did this summary help you?

Thanks to all authors for creating a page that has been read 638,846 times.

Is this commodity up to appointment?

Source: https://www.wikihow.com/Use-Color-Replacement-in-MS-Paint

Posted by: taylortheard.blogspot.com

Share this post